Yamaha AVX-S30 Owner's Manual page 19

3
While the Status indicator is blinking, press L
repeatedly to select an orientation of the
virtual left surround speaker, or press R
repeatedly to select an orientation of the
virtual right surround speaker.
Each time you press the button, the orientation
changes as follows.
20°
(Five status indicators from
the right or left light up)
30°
(Four status indicators from
the right or left light up)
40°
(Three status indicators from
the right or left light up)
50°
(Two status indicators from
the right or left light up)
60°
(Rightmost or leftmost status indicator
lights up)
y
Adjust the angle so that the first reflection point (A) is located
posterior to the listening position and surround speaker channel
audio reaches the listening position after reflections as shown
below. For information on the recommended listening
environment and virtual surround speaker settings, refer to
"Recommended Virtual Surround Speaker Settings" (page 20).
Satellite speaker (L)
Press L to
adjust
A
B
Satellite speaker (L)
Press L to
adjust
A
B
4
To confirm the adjustment, press TEST.
y
To reset the orientations to the factory settings, press INPUT on
the front panel while a test tone is output. (This procedure also
resets the speaker balance.)
CONFIGURATIONS
Satellite speaker (R)
Press R to
adjust
A
B
Satellite speaker (R)
Press R to
adjust
A
B
17