Connecting External Components; Digital Connection - Yamaha AVX-S30 Owner's Manual

Connecting External Components

The AV amplifier "AVC-S30" has four input jacks (optical digital x 2, coaxial digital x 1, analog x 1). Before connecting
your external components to the AV amplifier, check the output jacks of the components and be sure to use correct
connection cables.

■ Digital connection

Notes
• Do not connect the power cables of the AV amplifier and external components until all cable connections are completed.
• The digital terminals of this unit support PCM, Dolby Digital, DTS signal system.
• The digital terminals support digital signals of which sampling frequency is 96 kHz or less.
TV (monitor)
VIDEO INPUT
Video pin cable
(supplied with
DVD-S30)
To AC outlet
About optical cables
Use an optical cable with
the plug of 14 mm or less
(shown above).
DVD player (DVD-S30)
s
p
e
VIDEO OUT
(VIDEO)
4
INPUT
L
R
SYSTEM
CONNECTOR
SUBWOOFER
14 mm
DIGITAL OUT
COAXIAL
(OPTICAL)
DIGITAL OUTPUT
Optical cable
(supplied with
DVD-S30)
1 2 3 SPEAKERS
L
R
SPEAKER IMPEDANCE:6ΩMIN.
OUT
Optical cable
(commercially available)
VIDEO OUTPUT
OPTICAL
DIGITAL OUTPUT
TV game console etc.
PREPARATION
CD player with coaxial
digital output
Coaxial cable
(commercially available)
Video pin cable
(commercially
available)
VIDEO INPUT
TV (monitor)
9