Makita EM4350RH Original Instruction Manual page 29

Original instruction manual (284 pages)

Instruction manual (284 pages)

Instruction manual (108 pages)

Table of Contents

Available languages

TROUBLESHOOTING

Before making a request for repairs, check for trouble by yourselfέ If any abnormality is found, control your machine according to the description

of this manualέ σever tamper or dismount any part contrary to the descriptionέ όor repairs, contact Authorized Service Agent or local dealershipέ

State of abnormality

Engine does not startέ

Engine stops soonέ

Engine speed does not increaseέ

εetal blade does not rotateέ

Stop engine immediatelyέ

εain unit vibrates abnormallyέ

Stop engine immediatelyέ

εetal blade does not stop immediatelyέ

Stop engine immediatelyέ

Engine does not stopέ

Run engine at idling, and set choke lever

to "CδτSE"έ

Probable cause (malfunction)

Iάτ switch is set to STτPέ

όailure to operate primer pumpέ

δow pulling speed of starter ropeέ

δack of fuelέ

Clogged fuel ilterέ

Bent fuel tubeέ

Deteriorated fuelέ

Excessive suction of fuelέ

Detached plug capέ

Contaminated spark plugέ

Abnormal clearance of spark plugέ

τther abnormality of spark plugέ

Abnormal carburetorέ

Starter rope cannot be pulledέ

Abnormal drive systemέ

Insuficient warmάupέ

Choke lever is set to "CδτSE" although

engine is warmed upέ

Clogged fuel ilterέ

Contaminated or clogged air cleanerέ

Abnormal carburetorέ

Abnormal drive systemέ

δoosened metal bladeάtightening nutέ

Twigs caught by metal blade or dispersionά

preventing coverέ

Abnormal drive systemέ

Broken, bent or worn metal bladeέ

δoosened metal bladeάtightening nutέ

Shifted convex part of metal blade and metal

blade support ittingέ

Abnormal drive systemέ

ώigh idling rotationέ

Detached throttle wireέ

Abnormal drive systemέ

Detached connectorέ

Abnormal electric systemέ

βλ

Remedy

Set the Iάτ switch to τPERATIτσέ

Push ι to 1ί timesέ

Pull stronglyέ

όeed fuelέ

Cleanέ

Straighten fuel tubeέ

Deteriorated fuel makes starting more dificultέ

Replace with new fuelέ (Recommended

replacementμ 1 month)

Set throttle lever from medium speed to high

speed, and pull starter handle until engine

startsέ Once engine starts, cutting tool

starts rotating. Pay full attention to cutting

tool.

If engine will not start still, remove spark plug,

dry the electrode, and reassemble them as

they originally areέ Then, start as speciiedέ

Attach securelyέ

Cleanέ

Adjust clearanceέ

Replaceέ