Makita EM4350RH Original Instruction Manual page 18

HOW TO START AND STOP ENGINE
τbserve the applicable accident prevention regulations!
STARTING
εove at least γ m away from the place of refuellingέ Place the unit on the ground taking care that the cutting tool does not come into contact with
the ground or any other objectsέ
Aμ Cold start
1) Set this machine on a lat spaceέ
β) Set the Iάτ switch (1) to τPERATIτσ (β)έ
γ) Choke lever
Close the choke leverέ
Choke openingμ
όull closing in cold or when the engine is coldέ
●
όull or half opening if the engine is a bit warm, such as restarting engine
●
just after stopping during warmάup operationέ
ζ) Primer pump
Continue to push the primer pump (γ) until fuel comes into the primer pumpέ
(In general, ι to 1ί pushesέ)
If the primer pump is pushed excessively, an excess of gasoline returns to
the fuel tankέ
1κ
(2)
(1)
(3)