Table 7-1 Micromaster 440 Performance Ratings - Siemens MICROMASTER 440 Operating Instructions Manual

7 MICROMASTER 440 specifications
Table 7-1 MICROMASTER 440 Performance Ratings
Feature
Mains Operating Voltage
& Power Ranges
Input Frequency
Output frequency
Power Factor
Inverter Efficiency
Overload Capability for
Constant Torque (CT)
Inrush Current
Control Method
Pulse Frequency
Fixed Frequencies
Skip Frequencies
Setpoint Resolution
Digital Inputs
Analog Input 1
Analog Input 2
Relay Outputs
Analogue Output
Serial Interface
Electromagnetic Compatibility
Braking
Protection Level
Constant Torque
(CT)
Temperature
range
Variable Torque
(VT)
Storage Temperature
Humidity
Operational Altitudes
Protection Features
Standards
CE Marked
82
Specification
1 AC 200 to 240 V ± 10 %
CT
3 AC 200 to 240 V ± 10 %
VT
3 AC 380 to 480 V ± 10 %
CT
VT
3 AC 500 to 600 V ± 10 %
CT
VT
47 to 63 Hz
0 Hz to 650 Hz
≥ 0.7
96 to 97 %
50 % for a period of 60 s within 5 min or
100 % for a period of 3 s within 5 min in relation to therated output current
Less than rated input current
Linear V/f control, Linear V/f control with FCC, Parabolic V/f control, Multi-point
V/f control, Linear V/f control with low-power mode, V/f control for textile
applications, V/f control with FCC for textile applications, V/f control with
independent voltage setpoint, Sensorless Vector Control, Sensoless Vector
Torque Control
2 kHz to 16 kHz (2 kHz steps)
15, programmable
4, programmable
0.01 Hz Digital, 0.01 Hz Serial, 10 bit Analogue
(motor potentiometer 0.1 Hz [0.1% (in PID mode)])
6, programmable (isolated), switchable active high / active low (PNP/NPN)
0 - 10 V, 0 - 20 mA and –10 V to +10 V
0 - 10 V and 0 - 20 mA
3, programmable 30 V DC / 5 A (resistive), 250 V AC 2 A (inductive)
2, programmable (0 to 20 mA)
RS-485, optional RS-232
Optional EMC filters to EN55011 Class A or B,
also Internal Class A filters available selected units
DC braking, Compound braking and Dynamic braking
IP20
-10 °C to +50 °C (14 °F to 122 °F)
-10 °C to +40 °C (14 °F to 104 °F)
-40 °C to +70 °C (14 °F to 122 °F)
< 95 % RH – non-condensing
Up to 1000 m above sea level without derating
Undervoltage , Overvoltage, Overload, Ground Faults, Short circuit, Stall
Prevention, Motor Blocking Protection, Motor Overtemperature, Inverter
Overtemperature, Parameter Interlock
UL, cUL, CE, C-tick
Conformity with EC Low Voltage Directive 73/23/EEC
and Electromagnetic Compatibility Directive 89/336/EEC
0,12 kW – 3,0 kW (0,16 hp – 4,0 hp)
0,12 kW – 45,0 kW (0,16 hp – 60,0 hp)
5,50 kW – 45,0 kW (7,50 hp – 60,0 hp)
0,37 kW – 75,0 kW (0,50 hp – 100 hp)
7,50 kW – 90,0 kW (10,0 hp – 120 hp)
0,75 kW – 75,0 kW (1,00 hp – 100 hp)
1,50 kW – 90,0 kW (2,00 hp – 120 hp)
MICROMASTER 440 Operating Instructions
6SE6400-5AC00-0BP0
Issue A2