Panasonic DMC-G1K Operating Instructions Manual page 33

[HDMI MODE]
¢1 When [VIDEO OUT] is set to [PAL]
¢2 When [VIDEO OUT] is set to [NTSC]
Interlace method/progressive method
•
i= interlace scanning is scanning the screen with half of the effective scanning lines every 1/50
seconds, where p= progressive scanning is a high density image signal that is scanning the
screen with all the effective scanning lines every 1/50 seconds.
The [HDMI] terminal on this unit is compatible with high definition output [1080i]. It is necessary
to have a compatible TV to enjoy progressive and high definition images.
If the images are not output on the TV when the setting is [AUTO], match with the image format
•
your TV can display, and select number of effective scanning lines. (Please read the operating
instructions for the TV.)
This will work when the
•
Refer to P125 for details.
•
[VIERA Link]
This will work when the
•
Refer to P126 for details.
•
~ [LANGUAGE]
If you set a different language by mistake, select [~] from the menu icons to set the desired
•
language.
[VERSION DISP.]
[–. –] is displayed as the lens firmware when the lens is not mounted.
•
Set the format for the HDMI output when playing back on the
HDMI compatible high definition TV connected with this unit using
the HDMI mini cable (optional).
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for
output.
1 2
¢ ¢
[576p] /[480p]
The progressive method with 576
used for output.
HDMI mini cable (optional)
Setup so this unit can be controlled by the remote control of the
VIERA by automatically coupling this unit with the VIERA Link
compatible equipment using HDMI mini cable (optional).
[OFF]: Operation is performed with the buttons on this unit.
[ON]: Remote control operation of the VIERA Link
compatible equipment is enabled. (Not all operations
are possible)
Button operation of the main unit will be limited.
HDMI mini cable (optional)
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH]/[FRANÇAIS]/[ESPAÑOL]/[ITALIANO]/
[¢]
This enables the firmware versions of the camera and lens to be
checked.
:
1
¢
/480
is connected.
is connected.
Preparation
2
¢
available scan lines is
VQT1U50
33