Attaching/Detaching the Lens
Check that the camera is turned off.
Close the flash.
Turn the lens rear cap A and the body cap B in the direction of the
arrow to detach them.
Do not put your hands inside the mount.
Align the lens fitting marks C (red
marks) on the camera body and the lens
and then rotate the lens in the direction
of the arrow until it clicks.
Do not press the lens release button when you
attach a lens.
Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
Check that the lens is attached correctly.
Detach the lens cap.
Detach the lens cap before taking pictures.
Attaching a lens to the camera body