Default Settings; Low Battery Detection; Safety And Care; Warnings - Oregon Scientific AWS899 User Manual

DEFAULT SETTINGS

Date
Time
Clock display
Daily / weekday alarm
Sleep Mode
Wallpaper function
Silence Mode
Weather
Pressure display
Altitude
Thermo-hygro display
Indoor temperature trend Steady
Indoor humidity trend
Sensor search
Receive RF clock
Press RESET to restore all settings to factory defaults.
1/1/2005
00:00:00 (24 hour format)
or 12:00:00 am (12 hour
format)
Time-second display mode
Alarm disabled
Sleep start at 12:00 a.m.
and sleep end at 6:00 a.m.
& function disabled
Off
Off
Partly cloudy
Current pressure
0m
Current indoor
Steady
Enabled
Enabled

LOW BATTERY DETECTION

When battery levels get too low, the
appear. Also, when no adaptor is connected, the
icon will be displayed.
NOTE The main unit will display the channel battery
status when the corresponding channel is selected.

SAFETY AND CARE

Wash the unit with a slightly damp cloth and mild
detergent. Avoid dropping the unit or placing it in a high-
traffic location.

WARNINGS

This product is designed to give you years of service
if handled properly. Observe the following guidelines:
• Never immerse the unit in water. This can cause
electrical shock and damage the unit.
• Do not subject the main unit to extreme force, shock,
or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of
different types.
• Do not use rechargeable batteries with this product.
• Remove the batteries if storing this product for a
long period of time.
• Do not scratch the LCD display.
22
icon will