Keypad Tone; Reset System - Oregon Scientific AWS899 User Manual

7. Select the desired photo (when selected the photo
will be highlighted in blue).
8. Press the icon at the top right corner on the
display to start the transfer process. If the procedure
has been incorrectly done i.e. the
be highlighted.
9. When the process is complete the downloaded photo
will automatically show on the main unit display.
NOTE To switch back to the default weather picture,
press CHANNEL.

KEYPAD TONE

To activate the keypad tone:
1. Navigate to SETTINGS.
2. Select SOUND Setting Mode.
icon will not
3. Select SILENCE MODE - OFF.
To deactivate the keypad tone follow the instructions
above but select ON at point 3.
NOTE If you select SILENCE MODE - ON, both the
keypad tone and the background sound for the
weather forecast will be deactivated.

RESET SYSTEM

The RESET buttons are located on the back of the main
unit and in the battery compartment for the remote unit.
Press these buttons whenever you change the batteries,
or whenever performance is not behaving as expected
(e.g., unable to establish radio frequency link with
remote unit or automatic clock, etc.).
NOTE After resetting the system all system information
will be erased and returned to factory defaults. The main
unit will also check battery condition.
21