Door Reversibility - AEG A72710GNW0 User Manual

8.5 Levelling

8.6 Door reversibility

3
6
4
Accurate levelling prevents the vibration
and noise of the appliance during opera-
tion. To adjust the height of the appli-
ance loosen or tighten the two adjusta-
ble front feet.
To change the opening direction of the
2
door, do these steps:
• Remove the plug from the power
1
• Tilt back the appliance carefully so
• Remove the plinth (1).
• Remove the cap (2) and position it on
• Unscrew the hinge (3) and remove the
7
• Unscrew the lower pin and the wash-
8 • Position the pin and the washers (6) on
• Unscrew the other hinge (5)
• Unscrew the upper pin (4) and screw it
• Refit the door.
• Refit and screw both lower hinges.
• Refit the plinth (8).
5
•
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the oper-
ations.
socket.
that the compressor cannot touch the
floor.
the opposite side.
door.
ers (3)
the opposite side (7).
on the opposite side. (5)
ENGLISH
35