Assembly And Use For The 1.8L Bowl - Ninja BL770NZV2 Owner's Manual

Assembly and Use for the 1.8L Bowl

ASSEMBLY
Fig. 1
Fig. 2
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2
Align and lower the Bowl onto the motor base. (Fig.
1) Handle should be aligned slightly to the right of the
"LOCK" symbol on the motor base.
3
Rotate the bowl clockwise as far as it will go to lock in
place. (Fig. 2)
4
The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
5
Holding the desired blade by the top of the shaft, place
it onto the drive gear inside the bowl. Ensure that the
attachment is seated properly and is standing upright.
(Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
6 Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
11 AUST: 1800 890 840
Fig. 3a
Fig. 3b
7
Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( )
will flash and the motor will not work if the bowl
and lid are not installed correctly. When the bowl
and lid are installed properly, the power button (
) will be solid, indicating that the appliance is
ready for use.
8
Holding the lid by the handle in the upright position,
place it on top of the bowl aligning the arrow
( ) located on the lid with the arrow ( ) located on the
bowl's handle. (Fig. 5) Press the handle down until you
hear a click.
NOTE: The 1.8L bowl is not intended for blending
drinks. Do not overfill.
NOTE: To add liquids during blending, open the drizzle
hole on the top of the lid and pour
the liquid slowly into the mixture.
NOTE: Do not exceed the highest
measured marking line on the
side of the bowl. For meats do not
exceed 1 L bowl mark.
Fig. 4
Fig. 5