Installation; Electrical Connection - Baumatic BO600BL/SS/W Instruction Manual

o IMPORTANT: Be careful to note which way around the
oven door glass sits inside the oven door. YOU MUST pu
the door glass back into the oven door the same way
around.
o IMPORTANT: Care must be taken when cleaning between
the door glasses, and inside the inner frame as some of
the edges maybe sharp due to the manufacturing process.
o Do not use any abrasive cleaner that could cause damage.
o Remember that if the surface of the glass panel becomes
scratched, this could lead to a dangerous failure.
o When refitting, slide the inner door glass back into the oven
door. IMPORTANT: Ensure that the glass sits properly in the
recess at the base of the oven door and that it is the same way
around as it was originally.
Refit the plastic sealing section to the top of the oven door,
o
pushing it downwards to clip it back into position.
I NSTALLATION
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o UK Regulations and Safety Standards or their European
Norm Replacements.
o Building Regulation
Environment).
o Building Stan
Department).
o IEE Wiring Re
o Electricity At Work Regul
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
W ARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance should be wired into a 13 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. The spur
outlet must still be accessible even when your oven is located in
its housing.
s (issued by the Department of the
dards (issued by the Scottish Development
gulations.
ations.
t
22