Table of Contents
Advertisement
AW1600
■ RESTORING THE INTERNAL HARD DISK TO THE FACTORY-SET
CONDITION
In order to restore the internal hard disk to the factory-set
condition, you will need to perform the following two pro-
cedures.
1 Initialize the internal hard disk
2 Load the demo song and sample library
Initializing the Internal Hard Disk
When you initialize the internal hard disk, the system set-
tings will return to their factory-set state.
To access the D.IN HDD page of the UTILITY screen,
repeatedly press the Work Navigationsection [UTILITY]
key or hold down the [UTILITY] key and use the CURSOR
[3]/[4]keys.
FORMAT button
Formats (initializes) the internal hard disk. When you
move the cursor to this button and press the [ENTER] key,
the hard disk will be formatted. During execution, a popup
window will indicate the progress. When formatting has
been completed, the popup window will close automati-
cally.
NOTE
E
xecuting the Format operation will erase all data from the internal
hard disk, and the data cannot be recovered. We recommend you
to backup all data on the internal hard disk to a computer before
executing the Format operation.
Y
ou cannot abort the Format operation once it has been started.
N
ever turn off or disconnect the power during formatting, since this
may damage the hard disk and cause malfunctions.
Loading the Demo Song and Sample
Library
You can load the demo song and sample library from the
included CD-ROM to restore the AW1600 to its factory-
set condition.
1
Insert the included CD-ROM into the CD-RW
drive of the AW1600.
2
In the Work Navigate section, repeatedly
press the [CD] key to access the CD screen
RESTORE page.
72
3
4
FORMAT button
5
6
7
8
9
Make sure that the cursor is located at the
READ CD INFO button, and press the
[ENTER] key.
Loading from the CD-ROM will begin. When loading
is finished, the contents of the display will change as
follows.
Move the cursor to the DISABLE button and
press the [ENTER] key.
The DISABLE button will change to ENABLE, and
the symbol at the right of the list will change to .
Move the cursor to the PAD button and press
the [ENTER] key.
Once again, loading from the CD-ROM will begin.
When loading is finished, the contents of the display
will change as follows.
Move the cursor to the ALL button and press
the [ENTER] key.
Move the cursor to the DISABLE button and
press the [ENTER] key.
The DISPLAY button will change to ENABLE, and all
symbols at the right of the list will change to .
This selects all songs and sample libraries.
Move the cursor to the EXECUTE button and
press the [ENTER] key.
A popup window will ask you for confirma-
tion, so move the cursor to the OK button or
CANCEL button, and press the [ENTER] key.
While the Restore operation is being executed, the
state of progress will be shown in a popup window.
When this popup window closes, the operation has
been completed.
Hide quick links:
Advertisement
Table of Contents
