Connecting To A Wifi Network - Archos Arnova 7c G2 Manual

CONNECTING TO A WIFI NETWORK

www
For this procedure to work, you need to be in a WiFi zone that will allow you to connect to it. Every time the ARNOVA is
in range of a network that you have already configured once, it will attempt to make a connection.
To configure a new WiFi network, go on the Home screen, tap on the Menu icon
1
Settings .
select
2
Settings
In the screen, select
If the WiFi is off, tap on the
3
The ARNOVA will scan for available WiFi networks and display them at the bottom of
the screen.
4 Tap on the network you want to connect to, enter the required network information* and then
tap on Connect . Your ARNOVA will now attempt to establish a connection to that WiFi hot spot
with the network parameters you entered.
* For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters)
of the type WEP, WPA, or WPA2. To obtain the exact connection parameters required, contact the Internet service provider.
4
Wireless & networks
.
Wi-Fi line to turn it on. Then select
, then
Wi-Fi settings .