Advertisement
Assembly and Use for the Processor Bowl - cont.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.
USE
Fig. 1
Fig. 2
USING THE CHOPPING BLADE ASSEMBLY
1
Holding the Chopping Blade assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the attachment fits around the gear shaft and that it is
standing straight.
2
Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3
Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed or Auto-iQ
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ
Pulse
™
button until your desired consistency is reached.
NOTE: Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
4
When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
5
To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
6
Turn the bowl anticlockwise and lift it to remove it from
the motor base. (Fig. 3)
CAUTION: If pouring from the bowl, ALWAYS
remove the blade assembly first before pouring.
7
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you. (Fig. 4)
11
CUSTOMER CARE - NZ: 0800 002 999
REMOVAL
Fig. 3
Fig. 4
USING THE DOUGH BLADE
1
Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing straight.
(Fig. 5)
2
Add the ingredients and secure the bowl lid onto the bowl.
3
Plug the power cord into the electrical outlet and press
on the power button ( ). Select LOW/DOUGH on the
™
control panel and process until ingredients come
together to form a mass.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
4
Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning.
5
To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
6
Turn the bowl anticlockwise and lift it to remove it from
the motor base. (Fig. 3)
7
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
Assembly and Use for the Nutri Ninja
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.
IMPORTANT: Make sure that the motor base is plugged in for use.
USE
ASSEMBLY
Fig. 5
Fig. 2
Fig. 3
|
NOTE: Nutri Ninja
™
Technology can sense which jar is on the motor base. The
function lights will illuminate depending on which jar is placed
on the motor base. (Fig. 1)
1
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor base
to make sure that the suction cups adhere to the counter
or table top.
2
Add ingredients to the Nutri Ninja
3
Place the Pro Extractor Blades
screw it on clockwise until you have a good seal. (Fig. 2)
4
Turn the Nutri Ninja
the motor base, aligning the tabs on the cup with the
motor base. Rotate the Nutri Ninja
it locks in place, you will hear a click when the lock is
engaged. (Fig. 3)
5
Press the power button on, and select the speed or Auto-
iQ
program that suits your needs. The
™
Auto-iQ
™
program will stop the appliance automatically
at the end of the program. (Fig. 4)
™
USE
Fig. 4
6. To pause the appliance, press the selected speed or
Ninja
®
Blender System with Auto-iQ
™
Auto-iQ
7
Once you have reached your desired consistency,
turn the power button off. Turn the Nutri Ninja
anticlockwise and pull straight up to remove.
(Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "MAX" fill line.
™
cup.
8
Turn the cup upright and remove the Pro Extractor
onto the cup and tightly
Blades
™
9
Place the Sip & Seal
cup upside down and place it onto
to seal and enjoy!
™
10 Make sure that the motor base is unplugged when not in
™
cup clockwise until
use.
11 To release the motor base
from the counter or table top,
place your hands underneath
both sides of the motor base
and gently pull the unit up and
towards you. (Fig. 7)
REMOVAL
Fig. 1
Fig. 5
Fig. 6
™
Program a second time.
™
cup
by twisting the blade assembly anticlockwise.
™
lid onto the Nutri Ninja
cup, twist
™
™
Fig. 7
CUSTOMER CARE - AU: 1800 890 840
12
Advertisement
