Advertisement
|
Using the Nutri Ninja
Ninja
Blender System with Auto-iQ
™
®
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use.
CAUTION: DO NOT PROCESS HOT FOODS OR
HOT LIQUIDS.
CAUTION: Never remove the container while
the appliance is still running.
IMPORTANT: Never add ingredients into the
container before placing the blade in first.
IMPORTANT: Blades are not interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
7
CUSTOMER CARE - NZ: 0800 002 999
Technology
™
CAUTION: Blades
are not locked
in place. If using
the pour spout,
ensure that the
lid is fully locked
onto the blender
pitcher.
CAUTION: Blades
are not locked in
place. If pouring
with the lid
removed, ALWAYS
remove the blade
assembly first
before pouring.
CAUTION: Blade assemblies are sharp, not locked
in place and removable, handle with care. When
handling the blade assemblies, always hold them
by the shaft.
BEFORE FIRST USE
1
Remove all packaging material and labels from the
appliance.
2
Wash the lids, blender pitcher, bowls, Nutri Ninja
and blades in warm, soapy water with a soft cloth.
CAUTION: Handle the blade assemblies with care
when washing as the blades are very sharp.
3
Rinse and dry thoroughly.
4
The blender pitcher, bowls, Nutri Ninja
™
cups, lids and
blades, are all dishwasher safe. It is recommended that
the lids and blades be placed on the top rack. Ensure
that the blades are removed from the containers before
placing in the dishwasher.
5
Wipe the motor base clean with a damp cloth.
Assembly and Use for the Blender
WARNING: Never leave the appliance unattended while in use.
CAUTION: Blade assemblies are sharp, not locked in place and removable, handle with care. When
handling the blade assemblies, always hold them by the shaft.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
Fig. 4a
1
Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the attachment is seated properly and is
standing upright. (Fig. 1)
NOTE: The blade will fit loosely on the drive gear.
™
cups
2
Place the motor base on a clean, dry, level surface such
as a counter or table top.
3
Align and lower the Pitcher onto the motor base.
(Fig. 2) Handle should be aligned slightly to the right
of the "LOCK" symbol on the motor base.
LOW /
DOUGH
MED
4
Rotate the pitcher clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
5
The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 4a, Fig. 4b)
6
Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
HIGH
PULSE
DOUGH
LOW
FROZEN
SINGLE
SMOOTHIE
PUREE
BLENDING
SERVE
Fig. 2
LOW /
DOUGH
MED
Fig. 4b
HIGH
PULSE
DOUGH
LOW
FROZEN
SINGLE
SMOOTHIE
PUREE
BLENDING
SERVE
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
"MAX LIQUID" mark (2 L) on the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
7
Holding the lid by the handle in the upright position, place
it on top of the pitcher aligning the triangle ( ) located
on the lid with the triangle ( ) located on the pitcher's
handle. (Fig. 5a) Press the handle down until you hear
a click. The triangles on the lid and the blender handle
MUST be aligned in order for the blender to turn on.
(Fig. 5b)
8
Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power light
( ) will flash and the motor will not work if the
pitcher and lid are not installed correctly. When
the pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.
CUSTOMER CARE - AU: 1800 890 840
Fig. 3
Fig. 5b
Fig. 5a
LOW /
DOUGH
MED
8
Advertisement
