Osd Functions - ATEN Master View CS-88A User Manual

Aten technology kvm switch user manual
Hide thumbs Also See for Master View CS-88A:
Table of Contents

Advertisement

OSD Functions

OSD functions are used to configure and control the OSD. For example, you
can: rapidly switch to any port; scan selected ports only; limit the list you wish to
view; designate a port as a Quick View Port; create or edit a port name; or make
OSD setting adjustments.
To access an OSD function:
1. Press the Function Key that corresponds to the heading at the top of the
OSD screen.
2. In the Submenus that appear make your choice by moving the Highlight Bar
to it, then pressing [Enter].
3. Press [Esc] to return to the previous menu level.
M F1 GOTO:
Pressing F1 activates the GOTO function. GOTO allows you to switch
directly to a port either by keying in the port's Name, or its Port ID.
M
To use the Name method, key in 1; key in the port's Name; then press [Enter].
M
To use the Port ID method, key in 2; key in the Port ID; then press [Enter].
Note: You can key in a partial Name or Port ID. In that case, the screen will
show all the computers that the User has View rights to (see Set
Accessible Ports, p. 29), that match the Name or Port ID pattern,
regardless of the current List settings (see p. 24).
To return to the OSD Main Menu without making a choice, press [Esc].
CS-88A User Manual
2002-12-27
23

Advertisement

Table of Contents
loading

Table of Contents