Assembly And Use For The Nutri Ninja - Ninja BL68X Series Owner's Manual

Assembly and Use for the Nutri Ninja

WARNING: Never leave the appliance unattended while in use.
CAUTION: Pro Extractor Blades
Extractor Blades, do not hold the blades, always hold by the base of the Pro Extractor Blades.
CAUTION: DO NOT BLEND HOT LIQUIDS. Allow the liquids and foods to cool to room temperature before blending.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
or or
Fig. 2
IMPORTANT: When processing soft dry ingredients
such as day-old bread or cheese use quick, short 1
second pulses. Do not overfill to avoid overheating the
appliance. Allow the appliance to cool after each use.
|
NOTE: Nutri Ninja
Ninja
iQ Technology can sense which jar is on the motor
®
base. The function lights will illuminate depending on
which jar is placed on the motor base. (Fig. 1)
1
Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
2
Add ingredients to the Nutri Ninja cup.
3
Place the Pro Extractor Blades onto the cup and tightly
screw it on clockwise until you have a good seal. (Fig. 2)
4
Turn the Nutri Ninja cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor
base. Rotate the Nutri Ninja cup clockwise until it locks in
place, you will hear a click when the lock is engaged. (Fig. 3)
5
Press the power button on, and select the speed or
Auto-iQ program that suits your needs. The
Auto-iQ program will stop the appliance automatically
at the end of the program. (Fig. 4)
are sharp and removable, handle with care. When handling the Pro
™
Fig. 3
Blender System with Auto-
®
®
Fig. 1
USE
Fig. 4
6. To pause the appliance, press the selected speed or
Auto-iQ Program a second time.
7
Once you have reached your desired consistency, turn the
power button off. Turn the Nutri Ninja cup anticlockwise
and pull straight up to remove. (Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "MAX" fill line.
8
Turn the cup upright and remove the Pro Extractor
Blades by twisting the blade assembly anticlockwise.
9
Place the Sip & Seal
to seal and enjoy!
NOTE: Sip & Seal lid not intended for use with the XL
Multi-serve 1.4 L Ninja Jar.
10 Make sure that the motor base
is unplugged when not in use.
11 To release the motor base
from the counter or table top,
place your hands underneath
both sides of the motor base
and gently pull the unit up and
towards you. (Fig. 7)
www.sharkninjamanuals.com
REMOVAL
Fig. 5 Fig. 6
lid onto the Nutri Ninja cup, twist
®
Fig. 7
14