Assembly And Use For The Mini Prep Bowl - Ninja BL68X Series Owner's Manual

Table of Contents

Advertisement

Assembly and Use for the Mini Prep Bowl

WARNING: Never leave the appliance unattended while in use.
CAUTION: Mini Prep Bowl Blade is sharp, not locked in place and removable, handle with care. When
handling the Mini Prep Bowl Blade, always hold by the shaft.
ASSEMBLY
Fig. 1
Fig. 3
USING THE MINI PREP BOWL
NOTE: The mini prep bowl must be used with the
flat food processor lid.
1
Place the 1.8 L bowl onto the motor base.
2
Holding the spindle by the shaft, place it onto the gear
shaft inside the 1.8 L bowl. Ensure that the attachment
fits around the gear shaft and that it is standing
straight. (Fig. 1)
3
Place the mini prep bowl aligning the spindle inside the
centre post. (Fig. 2)
4
Hold the Mini Prep Bowl Blade by the shaft and carefully
place it over the centre post of the mini prep bowl. (Fig. 3)
5
Add ingredients into the mini prep bowl.
6
Holding the lid by the handle in the upright position,
place it on top of the 1.8 L bowl aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl's handle. (Fig. 4) Press the handle down until you
hear a click.
13
1-877-646-5288
Fig. 2
Fig. 4
USE
Fig. 5
7
Plug the power cord into the electrical outlet and press
on the power button ( ).
8
Select the speed that best suits your needs. For best
results, hold the Auto-iQ
have reached your desired consistency. (Fig. 5)
NOTE: Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
9
When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Mini Prep Bowl Blade to stop turning.
10 To remove the lid, pull the lid handle up to a 90° angle
and lift the lid off. (Fig. 6)
11 Carefully hold the Mini Prep Bowl Blade by the shaft and
lift it out of the mini prep bowl. (Fig. 7)
12 Turn the bowl anticlockwise and then lift off the base.
CAUTION: If pouring from the bowl, ALWAYS remove
the Mini Prep Bowl Blade first before pouring.
REMOVAL
Fig. 6
NutriNinja
AUTO
FROZEN DRINKS
A
UTO
BLEND
SMOOTHIES
NutriNinja
AUTO
FOOD
ON
1500
PUREE
OFF
WATTS
AUTO
PULSE
MED
HIGH
LOW
Fig. 7
NutriNinja
AUTO
FROZEN DRINKS
A
UTO
BLEND
SMOOTHIES
NutriNinja
AUTO
FOOD
ON
1500
PUREE
OFF
WATTS
AUTO
PULSE
MED
HIGH
LOW
Pulse button down until you
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents