Assembly And Use For The Food Processor - Ninja BL68X Series Owner's Manual

Assembly and Use for the Processor Bowl
WARNING: Never leave the appliance unattended while in use.
CAUTION: Chopping Blade is sharp, not locked in place and removable, handle with care. When handling
the Chopping Blade, always hold by the shaft.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 5a
|
NOTE: Nutri Ninja
Ninja
®
Auto-iQ Technology can sense which jar is on the
®
motor base. The function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 1)
1
Holding the desired blade by the top of the shaft, place it onto
the drive gear inside the bowl. Ensure that the attachment is
seated properly and is standing upright. (Fig. 2)
NOTE: The blade will fit loosely on the drive gear.
LOW /
DOUGH MED
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3 Align and lower the Processor Bowl onto the motor
base. (Fig. 3) Handle should be aligned slightly to the
right of the "LOCK" symbol on the motor base.
4 Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 4)
5 The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 5a, Fig. 5b)
Fig. 1
LOW /
DOUGH MED
Fig. 5b
Blender System with
®
Fig. 2
Fig. 3
Fig. 6a
6
Add the ingredients to the bowl, making sure that they
do not exceed the "MAX" fill line on the side of the bowl.
7
Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle MUST be aligned
in order for the blender to turn on. (Fig. 6b)
NOTE: The 1.8 L bowl is not intended for blending
drinks. Do not overfill.
8
Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the bowl and lid are not installed correctly.
When the bowl and lid are installed properly, the
power button ( ) will be solid, indicating that the
appliance is ready for use.
www.sharkninjamanuals.com
Fig. 4
Fig. 6b
LOW /
MED
DOUGH
10