Ninja BL68X Series Owner's Manual page 12

Assembly and Use for the Processor Bowl - cont.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Chopping Blade is sharp, not locked in place and removable, handle with care. When handling
the Chopping Blade, always hold by the shaft.
USE
Fig. 1
USING THE CHOPPING BLADE
1
Holding the Chopping Blade by the shaft, place it
onto the gear shaft inside the bowl. Ensure that the
attachment fits around the gear shaft and that it is
standing straight.
2
Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3 Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed or Auto-iQ
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ Pulse button
until your desired consistency is reached.
NOTE: Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
4
When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
5 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
6
Turn the bowl anticlockwise and lift it to remove it from
the motor base. (Fig. 3)
CAUTION: If pouring from the bowl, ALWAYS
remove the blade assembly first before pouring.
7 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you. (Fig. 4)
11 1-877-646-5288
REMOVAL
Fig. 2 Fig. 3
1
2
3
®
4
5
6
7
Fig. 4
USING THE DOUGH BLADE
Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing straight.
(Fig. 5)
Add the ingredients and secure the bowl lid onto the bowl.
Plug the power cord into the electrical outlet and press
on the power button ( ). Select LOW/DOUGH on the
control panel and process until ingredients come
together to form a mass.
NOTE: Please refer to "Speed Settings & Uses" chart
for suggested uses and speeds.
Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning.
To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
Turn the bowl anticlockwise and lift it to remove it from
the motor base. (Fig. 3)
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
USE
Fig. 5