Remote Control - Pioneer A-509R Service Manual

8.3 REMOTE CONTROL

1
CD POWER button
Switches CD player power STANDBY/ON.
2
AMP POWER button
Switches the amplifier power STANDBY/ON.
3
TAPE SELECT button
Selects the cassette No. (1 to 6) for a multi-cassette changer.
4
DECK II button
To operate Deck II, press this button before pressing the operat-
ing buttons. Also, when using a single deck, press this button
before pressing the operating buttons.
5
DECK I button
To operate Deck I, press this button before pressing the operat-
ing buttons.
6
DISC SELECT button
Press this to select discs on a multi or twin tray compact disc
player.
7
Input selector buttons
Use to select the playback source.
CD : For compact disc playback with a CD player.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable.
TAPE 1 : For playback with a cassette deck, CD recorder or
MD recorder connected to the TAPE 1/CD-R/MD ter-
minals.
TAPE 2 : For playback with a cassette deck or adaptor con-
nected to the TAPE 2 MONITOR terminals.
LINE : For playback with a component connected to the
LINE/SURROUND BACK terminal.
1
2
STANDBY / ON
3
AMP CD
TAPE
2
SELECT
4
I II
DECK DECK
5
4 ¢
_
DISC
SELECT STATION
6
CD TUNER
7
TAPE 1 TAPE 2
STEREO AMPLIFIER
REMOTE CONTROL UNIT
8
9
TUNER TAPE
7 3
0
TAPE
1 ¡
7 3
CD
-
+
=
TUNER
+
PHONO
~
VOLUME
LINE
Î
8
TUNER POWER button
Switches TUNER power STANDBY/ON.
9
TAPE POWER button
Switches the cassette deck power STANDBY/ON.
0
TAPE operation buttons
2, 3
: Playback in the direction of the arrows.
7
: Stop
1, ¡ : Tape fast forward/reverse.
-
CD player operation buttons
4
: Returns you to the start of the current track
(Track search).
¢
: Takes you to the start of the next track
(Track search).
7
: Stop
3
: Play
=
STATION +, – buttons (TUNER)
Calls each station number in sequence.
~
VOLUME +, – buttons
+
........................................................... Increases the volume.
– ......................................................... Decreases the volume.
NOTE:
When the accessory remote control unit is used to operate other
PIONEER components with the Î mark, it cannot be used to
operate functions which do not correspond to the functions listed
on the remote control unit.
A-509R
29