Turn On Options - Parasound ZoneMaster650 Owner's Manual

Turn On Options

The setting of the rear panel Turn On Options Switch determines whether all three zones turn on and
off together or if each zone turns on and off individually. There are three positions for this switch:
Manual All
Pressing the Power button on the front panel will turn all three zones on and off together.
12V All
When a 12V trigger voltage is applied to the 12V Input jack marked "Trigger For All Zones" all three
zones will turn on together. When the trigger voltage is removed all three zones will turn off together.
Note: Whenever the 12V All switch is set to 12V All the ZoneMaster 650's front
Note: The 12V turn on trigger circuit in the ZoneMaster 650 requires a mere 5mA
Audio/12V By Zone
Each zone can be turned on and off individually by either an audio signal or a 12 volt
trigger. The setting of the three Zone 12V / Audio switches determines whether an
individual zone is turned on and off by 12 volts or turned on and off by audio. Whenever
the switch is set to "Audio/12V By Zone" the front panel Power button will be disabled to
prevent the amplifier from being turned on or off manually or by mistake.
Note: The 12V turn on trigger circuit in the ZoneMaster 650 requires a
™ 650 Owner's Manual
®
Parasound ZoneMaster
panel Power button will be disabled to prevent the amplifier from being
turned on or off manually or by mistake.
from the 12V trigger source.
mere 5mA for each 12V input.
Page 12