Parasound Zphono XRM Owner's Manual
  1. Manuals
  2. Brands
  3. Parasound Manuals
  4. Amplifier
  5. Zphono XRM
  6. Owner's manual

Parasound Zphono XRM Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Zphono XRM
Phono Preamplifier
OWNER'S GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Zphono XRM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Parasound Zphono XRM

Summary of Contents for Parasound Zphono XRM

  • Page 1 Zphono XRM Phono Preamplifier OWNER’S GUIDE...
  • Page 2 Important Safety Instructions The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of “dangerous voltage” inside the product that may constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the product.

  • Page 3: Table Of Contents

    ......... . Zphono XRM Design Overview .

  • Page 4: Introduction

    The Parasound Staff Keeping Records for Future Reference Record the serial number located on the back panel or bottom of your Zphono XRM in the space below. Also note your Parasound Dealer’s name and telephone number. Your purchase receipt/bill of sale is required to determine if your Zphono XRM is eligible for Parasound warranty service.

  • Page 5: Unpacking And Placement Guidelines

    Parasound dealer immediately if you find any. If possible, save and store the carton and the foam packing inserts, to protect the Zphono XRM if you have to move it or ship it. You may wish to flatten the cardboard cartons to save room in storage after cutting the taped seams on the bottom flaps.

  • Page 7: Turntable Connections

    Note: In some systems eliminating hum or buzz might require connecting your turntable ground wire directly to your integrated amplifier or preamp instead of to the Zphono XRM. You can use a chassis screw or the outer ring of an RCA connector. In rare instances hum might be lowest if your turntable ground wire is not attached at all.

  • Page 8: Cartridge Gain Selection

    50 dB For low output moving magnet cartridges. MC Input Impedance Adjustment The Zphono XRM’s Impedance adjust knob allows you to fine tune the input impedance for MC cartridges over a range of 50 ohms to 1050 ohms. Cartridge manufacturers recommend what they consider to be an optimal load impedance.

  • Page 9: Ac Power Connection

    XRM into the same AC wall outlet or line conditioner that your preamplifier or integrated amp is plugged into. If a different AC outlet is used for the Zphono XRM the ground potential may be higher or lower between the AC outlets, resulting in audible hum.

  • Page 10: Frequently Asked Questions

    - Ensure that the Zphono XRM, preamp, power amp (or integrated amp) are plugged into the same wall AC outlet or power strip. -You might find that you need to attach the Zphono XRM Ground terminal to an audio ground on your preamplifier. Contact Parasound Technical Service for specific instructions.

  • Page 11: If You Require Assistance Or Warranty Repair

    1. The unit was not purchased from a Parasound Authorized Dealer. 2. You do not have the original bill of sale or sales receipt from a Parasound Authorized Dealer. 3. You are not the original owner. The Parasound warranty is not transferable.

  • Page 12: Specifications

    40 dB / 50 dB / 60 dB (unbalanced output) 46 dB / 56 dB / 66 dB (balanced output) Specifications and features subject to change or improvement without notice. Copyright Parasound Products, Inc., 2018, Rev 1.0 Parasound Products, Inc. 2250 McKinnon Ave, San Francisco, CA 94124 (415)-397-7100 www.parasound.com...

Table of Contents