Kenmore 110.2233 series Use & Care Manual page 9

7. Select SOIL LEVEL
Light Medium
® @
Extra
Light •
eHeavy
Soll Level
Once you select a cycle, select the soil level by turning the
Soil Level knob to the desired setting.
8. Select WASH TEMPERATURE
Cool
Darks
®
Cold
@
Cool
Lights
®
Warm
@
Hot
o
Wash Temp
After selecting the load size, select the Wash Temperature by
turning knob to desired temperature. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added
to save energy. This may be
cooler than your hot water
heater setting.
Warm
Some cold water may be
added, so this will be cooler
than what your previous washer
provided.
Cool Lights
Warm water is added to assist
in soil removal and to help
dissolve detergents. Cool is
slightly warmer than cold.
Cool Darks
Warm water is added to assist
in soil removal and to help
dissolve detergents. Cool is
slightly warmer than cold.
Cold
Warm water may be added
to assist in soil removal and to
help dissolve detergents.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
Dark colors that bleed or fade
Light soils
Dark colors that bleed or fade
Light soils
9.
Select options (on some models)
One Two
Rinse Rinses
® ®
Rinse
Select the desired cycle options, turn the knob to desired setting.
flU._ Press START/PAUSE/Unlock Lid
to begin wash cycle
____) START
PAUSE
UNLOCK LiD
CANCEL
HOLD 3 SEC
Press the START/PAUSE/Unlock Lid button to start the wash
cycle. When the cycle has finished, the Cycle Complete
status light wJJJlight. Promptly remove garments after cycle
has completed to avoid odor, reduce wrinkling, and rusting of
metal hooks, zippers, and snaps.
Unlocking the lld to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE/Unlock Lid; the lid will unlock once the
washer movement has stopped. This may take several minutes
if the load was spinning at high speed. Then close lid and press
START/PAUSE/Unlock Lid again to restart the cycle.
NOTES:
[] Washer will not fill with the lid open.
[] If your washer does not have a soak option, then pause
your washer to soak by pressing the Start/Pause button.
Soaking should be done with the lid closed. When you are
done soaking, press the Start/Pause button to bring washer
out of Pause and resume the cycle.
iMPORTANT: If lid is left open for more than 10 minutes, the
water wJJJpump out automatically.