Advertisement
Personal Speed Dial Registration - To register
several speed dial numbers:
• Press the FEAT button.
• After entering a phone number, press the Speed
button.
• Enter another speed dial code number, repeat
the same procedure.
To register a pause time:
• At the desired location, press HOLD/DND.
• Dial
to
for the desired pause time in
seconds.
Note: Pause may not be used on ISDN PRI or
ISDN BRI lines.
To register a short flash:
• At the desired location, press [FLASH].
Note: Short Flash may not be used on ISDN PRI or
ISDN BRI lines.
To set an outside line to be selected for speed
dialing:
• Do not lift receiver.
• Press the FEAT button.
• Press Speed and
, then dial the desired
Personal Speed Dial Code (Bin 90-99).
• Dial the desired outside line group number (000-
250).
• Press FEAT to end the operation.
To register a directory name for a speed dial
number:
• Do not lift receiver.
• Press the FEAT button .
• Press the Speed button and
desired Personal Speed Dial Code (Bin 90-99).
• Register the letters of the name using the dial
pad.
• Press the button until the desired letter is
displayed, then press the HOLD/DND button to
enter that letter or number (up to 10 characters).
A,B,C,2
-,.,[space],1
G,H,I,4
J,K,L,5
P,Q,R,S,7
T,U,V,8
Alphanumeric
&,0
[FEAT] All delete
[HOLD] Enter/1 character delete
• Press FEAT to end the operation.
11
, then dial the
D,E,F,3
M,N,O,6
W,X,Y,Z,9
Upper/lower case
Voice Mail
Your Voice Mail Box can be accessed through the
display menu or via the Mail Box key located on the
telephone key pad.
To Access Voice Mail
• Select the Vmail menu key.
or
• Press the Voice Mail key on the key pad.
Note: If you have an IX-4EVMC voice mail card
installed in your system, your Vmail display menu
may appear with a message count (i.e., 2 Msgs).
The display will show up to 999 messages.
If this is the first time that you have connected to
your voice mail box, follow the directions for setting
up your voice mail.
ADVANCED FEATURES
Making an E-Response Help Call
If programmed, your Iwatsu Enterprise-CS System
provides emergency notification to a group of
telephones or paging system.
Note: This feature is in addition to 911 Support.
• Go off hook and do not dial for more than 10
seconds.
or
• Go off hook and begin dialing a system
extension. Between digits pause for more than
10 seconds.
or
• At intercom (ICM) dial tone dial the E-Response
Group access number.
The system will initiate an E-Response Help Call to
the stations in your E-Response Group and/or a
paging system.
Answering Machine Emulation (Voice Mail
Monitor)
Station users may monitor voice mail messages as
they are recorded. During recording monitor, the
station user may select to initiate a conversation
with the caller. You may activate or deactivate this
feature from your extension.
To begin Voice Mail Monitor
When a call is answered by voice mail at an idle
station, you will hear a monitor tone.
• The [Voice Mail Monitor] key red LED will begin
to flash.
• Press the [Voice Mail Monitor] key.
• When the [Voice Mail Monitor] key green LED
lights, you will hear the caller's message as it is
recorded.
• Press the [Voice Mail Monitor] key a second
time to begin talking to the caller.
or
• Press Speaker or hang up to end voice mail
monitoring. The caller's message will be saved to
your voice mailbox.
12
Advertisement
