Nilfisk-Advance City Ranger 2250 Operator's Manual page 13

Change from left to right side of machine
1. Move the joystick to the left.
The end of the cutting bar now moves down. Do not stop
the machine until the cutting arm end is on the right.
(Picture 1)
2. Move the boom from left to right position.
Free the locking pin by turning the handle out to 90°.
The boom can now be tilted to the right side and locked.
(Pictures 2 and 3)
Tips!
Small paths
If a small path has to be trimmed, tilt the boom all the way
over to the opposite side. The cutting bar remains close to
the machine.
Tips!
Reach
If a long side-reach is required, tilt the boom to the side
where trimming is to be done.
3. Press and hold the black button and move the joystick to
the left. The arm now moves to the right. (Picture 4)
Operator's Manual City Ranger 2250 Hedge Trimmer
Operator's manual
1
Cutting bar on right side
2
Boom adjustment
3
Locking pin
4
Arm to right
13