Eclipse AVN5435 Reference Manual page 406

- An example for connecting the parking brake signal -
Use a splicing connector to connect the parking
brake signal cable (red/white) coming from the
main unit to the parking brake signal cable of the
vehicle.
Route the parking brake signal cable to the main
unit.
Hand-operated
Parking brake
~f!l~
• r "/\
~¥
Parking brake
Signal Cable
I
,
Foot-operated
Parking brake
Position to attach
a splicing connector
--6}i~~
Parking brake
signal cable
- An example for connecting the reverse signal cable -
~
Tip - - - - - - -
• Be sure to connect the reverse signal cable. If it is
not connected, the vehicle position may be
incorrect when the vehicle is reversed.
• Use a circuit tester to confirm that a sensing
voltage of 6 V or higher is generated when the
vehicle is reversed.
Use a splicing connector to connect the reverse
signal cable (green) coming from the main unit to
the reverse signal cable of the vehicle.
Route the reverse signal cable to the main unit.
- 11 -
Position to attach
a splicing connector
-~=p
Reverse signal cable