Route Search - Eclipse AVN5435 Reference Manual

2. Set a destination and search for a route
• If a destination is already set, touch
~
to delete the set
destination and set a new one.
• Touch
~
to add a destination.
"Adding a destination" (Page 75)
(Refer to
II
to
D.)
Route search
Set a destination and a route search will automatically start.
• A route search will continue even if switching to other screens.
• The route will not appear if the distance to the destination is too short.
• When a route search is complete, an all-route display (all routes from the present location
to the destination) screen will appear.
If a route search is conducted on a freeway or toll road interchange (Ie), the
search result route may start from a nearby local road. In such a case, reinitiate a
route search (Refer to page 96).
If the destination is on a freeway or
in an inaccessible area, the follow-
ing screen will appear. Touch the
item corresponding to the situation.
• Touch
ID
to set the
destination on the highway.
• Touch
~
to set the
destination on another road.
If the destination is inaccessible or
if there is a river, railroad or other
obstruction in its vicinity, the follow-
ing screen may be displayed.
• Touch
~
to set that point as
the destination.
• Touch
ID
to move the
destination.