Furuno FAR-2827W Installation Manual page 38

2. WIRING
Connector
plug
8. Confirm that all screws are tightened and all wiring is properly made. Confirm that
waterproofing gasket, bolts and tapping holes of antenna unit are coated with silicone
grease.
9. Attach the antenna covers (torque: 2.5 N·m).
2-4
Wiring for WAGO connector
Wire
Twist
Procedure
1. Twist the cores.
2. Press the terminal opener downward.
3. Insert the wire to hole.
4. Remove the terminal opener.
5. Pull the core to confirm that it is ecure.
S901
03P9349
Antenna unit, internal view
Press downward.
Terminal opener
WAGO Connector
MPYCY-19 cable