Handling the remote controller CONTENTS Location of the remote controller. Use the remote controller within a distance of 8 Handling the remote controller ............meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. Remote controller Specifications........... Function buttons ....
TEMP UP Button CAUTIONS Function buttons Push this button to increase the indoor temper- Do not mix old and new batteries or batteries of a different type. ature setting in 1 C increments to 30 C. Do not leave the batteries in the remote controller if it is not going TEMP DOWN Button to be used for 2 or 3 months.
Indicators on LCD Function buttons(continued) MODE display TIMER ON Button Displays the current selected mode. Including Press this button to activate the Auto-on time AUTO, COOL, DRY, HEAT(cooling & heating setting. Each press will increase the time setting models only) and FAN. SET TEMPERATURE( C) in 30 minutes increments, up to 10 hours, then at AUTO...
How to use the buttons Dehumidifying operation SET TEMPERATURE( C) Auto operation Ensure the unit is plugged in and power is available. The OPERATION indicator on the AUTO SET TEMPERATURE( C) COOL HIGH Ensure the unit is plugged in and power is display panel of the indoor unit illuminates.
Timer operation IMPORTANT The effective operation time set by the remote controller for the timer press the TIMER ON button can set the auto-on function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, time of the unit. And press the TIMER OFF button 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, can set the auto-off time of the unit.
TIMER ON TIMER OFF TIMER OFF (Off Start Stop operation) (Auto-off Operation) This feature is useful when you want to start The TIMER OFF feature is useful when you want TIMER ON OFF the air conditioner before you wake up and TIMER OFF the unit to turn off automatically after you go to bed.
Need help?
Do you have a question about the V2MKI-24 and is the answer not in the manual?
Questions and answers