Control Stations; Mounting Brackets - Chamberlain MH 5011U User Manual

ACCESSORIES
REMOTE CONTROLS 315 MHZ
LiftMaster offers a variety of SECURITY✚
Remote Controls for your application needs.
Single to 4-Button, visor or key chain. Contact
your authorized dealer.
371LM
®
1-Button SECURITY✚
Includes visor clip.
373LM
®
3-Button SECURITY✚
Includes visor clip.
333LM
3-Button Tri-Colored Dip Switch Remote
Control:
Open/Close/Stop functionality. Includes visor
clip.
WPB1LM3
Wireless Single Push Button Control
®
SECURITY✚ :
Rugged composite housing. (Wireless controls
cannot be used in place of hard wired controls.)
WPB3LM3
Wireless 3 Button Control Station
®
SECURITY✚ :
Rugged composite housing. (Wireless controls
cannot be used in place of hard wired controls.)
WKP5LM3 (5 4-digit entry codes)
WKP250LM3 (250 4-digit entry codes)
Wireless Access Control Keypads
®
SECURITY✚ :
Rugged composite housing. (Wireless controls
cannot be used in place of hard wired controls.)

CONTROL STATIONS

02-102
2-Button Control Station:
Steel enclosure.
02-103
3-Button Control Station:
Steel enclosure.
02-109
Key Control Station:
Indoor fl ush mount, NEMA 1.
®
Remote Control:
Remote Control:
ENTRAPMENT PROTECTION DEVICES
CPS-UN4
Commercial Protector System:
LiftMaster Monitored Entrapment Protection
(LMEP) provides protection on doors up to 45'
wide. NEMA-4 rated.
CPS-U
Commercial Protector System:
LiftMaster Monitored Entrapment Protection
(LMEP) provides protection on doors up to
30' wide.
CPS-EI
Monitored Sensing Edge Interface:
Requires 4-wire monitored sensing edge.
65ME1234
Miller ME123 4-Wire Monitored Safety Edge:
For sectional or rolling doors.
65ME110
Miller ME110 4-Wire Monitored Safety Edge:
For rolling grilles and counter shutters.

MOUNTING BRACKETS

10-12360
Mounting Brackets:
Angle mounting bracket, Painted steel, for MJ,
MH, and MHS.
10-9095
Medium Duty Angle Mounting Bracket:
Heavy-gauge steel bracket. May be welded.
For use with MJ, MGJ, and MH operators.
CHAIN TENSIONERS
71-6023
^
O P O P
E N E N
Chain Tensioner:
C LO C LO
S E S E
O
S TO S TO
P P
For 1" shafts
71-6125
Chain Tensioner:
For 1-1/2" shafts
11
CPS-EI
E1
LMEP2
E2
LMEP1
E3
E4
40-34141-1
For Jackshaft Type
Operators