Using Bluetooth; Bluetooth Parameters; Printpad Cn70 Indicators; Power Leds - Datamax PrintPAD CN70 User Manual

Using Bluetooth

Note: The following information applies to printers with Bluetooth capabilities.
Radio printers are configured with default factory settings. To determine your printer's radio configuration, print a
self-test. (For more information, see
specifically for use in your environment.
For proper system operation, set the following parameters on your printer and host computer:

Bluetooth Parameters

Device Name

Authentication

Bondable

Discoverable

Connectable

Encryption

Contact your network administrator to verify the proper radio settings for your environment.
PrintPAD CN70 LEDs and Indicators

Power LEDs

Power LED
Battery Status LED
Battery Status LED
Red (solid):
The battery has less than 5% power.
Orange (solid):
The battery has less than 25% power.
Green (solid):
The battery is near, or at, full capacity.
Red to orange flash - fast
Orange flash - slow
Orange flash - fast
Orange, red, or green flash - fast
Printing a Self-Test on page 5
Description
• If A/C power is not plugged in, the
printer will soon turn off.
• If A/C power is plugged in, the LED
flashes and charging is in progress.
• If A/C power is not plugged in, indicates
the battery charge is low.
• If A/C power is plugged in, the LED
flashes and charging is in progress.
• If A/C power is not plugged in, the
battery is well charged.
• If A/C power is plugged in, the LED is
solid and charging is complete.
Battery voltage is too high.
Charge has timed out.
Internal code error.
When the AC adapter is plugged into the
printer's power port, the battery status
LED flashes orange, red, or green
(depending on the battery status LED color
that is initially displayed) to indicate the AC
adapter is plugged in.
6
PrintPAD CN70 USER'S GUIDE
.) If you have multiple printers, configure them
Radio LED
Action
• Charge the battery.
• None. Wait for the charge LED to turn
green.
• Charge the battery.
• None. Wait for the charge LED to turn
green.
None.
None.
Replace battery.
Restart battery charge (battery may be
bad).
Remove the battery, then re-connect A/C
power.
None.