Viessmann VITOTRONIC 100 Operating Instructions Manual page 28

Scanning Options
Scanning Information
Vitotronic 300-K — scans for the heating system
Subject to the connected components and settings
made, you can scan current temperatures and operating
conditions.
The extended menu splits the information into groups:
H "General"
H "Heating circuit 1"
H "Heating circuit 2"
H "Heating circuit 3"
H "DHW"
H "Solar"
H "Reset data"
Note: If heating circuits have been given names,
the name is displayed (see chapter
"Entering names for the heating circuits").
For detailed scanning options for the individual
groups, see chapter "Scanning options in the
extended menu".
Extended menu
1.
2. "Information"
3. Select the group.
4. Select the required scan.
28
(continued)
Vitotronic 100, GC1B / Vitotronic 300-K, MW1B Operating
Scanning in conjunction with solar thermal systems
Extended menu
1.
2. "Solar energy"
The solar energy yield for the past 7 days is displayed
on a graph.
The flashing line on the graph indicates that the current
day is not yet over.
Note: Further scanning options, e.g. for the solar circuit
pump hours run, can be found in the extended
menu under "Information" in the "Solar" group.
Resetting data to 0
You can reset the following data:
H In conjunction with a solar thermal system:
Solar energy yield and hours run for the solar circuit
pump and output 22.
H All the above data simultaneously.
Extended menu
1.
2. "Information"
3. "Reset data"