Draytek Vigor 2132 Series Quick Start Manual page 12

Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
USB1~USB2
WAN
LAN1~LAN4
Phone1~ Phone2
PWR
ON/OFF
Vigor2132 Series Quick Start Guide
Description
Press the button and release it within 2 seconds.
When the wireless function is ready, the green LED
will be on.
Press the button and release it within 2 seconds to
turn off the WLAN function. When the wireless
function is not ready, the LED will be off.
When WPS function is enabled by web user
interface, press this button for more than 2 seconds to
wait for client's device making network connection
through WPS.
Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
Connecter for a USB device.
Fiber connection (100/1000Mbps) for accessing the
Internet.
Connecters for local network devices.
Connecter for analog phone(s).
Connecter for a power adapter.
Power Switch.
4