Disassembly Of Smps P.c.b - Panasonic SA-AKX32PH Service Manual

9.15.2. Assembly of Audio Digital Amp IC
(IC5900)
Step 1 Apply grease to the Heatsink.
Step 2 Fix the Audio Digital Amp IC (IC5900) on D-Amp P.C.B.
Caution: Ensure pins of the Audio Digital Amp IC (IC5900)
are properly seated on D-Amp P.C.B.
Step 3 Fix Heatsink Clip to the Heatsink.
Caution: During assembling, ensure that Heatsink Clip is
catched onto Heatsink properly.
Step 4 Solder pins of the Audio Digital Amp IC (IC5900) on the
solder side of D-Amp P.C.B..

9.16. Disassembly of SMPS P.C.B.

• Refer to "Disassembly of Top Cabinet.".
• Refer to "Disassembly of Front Panel Unit".
• Refer to "Disassembly of D-Amp P.C.B.".
Step 1 Remove 1 screw.
Step 2 Remove 3 screws.
Step 3 Remove the Fan Fixture.
Caution: Keep the Fan Fixture in safe place, place it back
during assembling.
Step 4 Detach 15P Cable Wire at the connector (CN5802) on
SMPS P.C.B..
46