9.23. Disassembly of Rear Panel
• Refer to "Disassembly of Top Cabinet".
• Refer to "Disassembly of Tuner P.C.B.".
Step 1 Remove 8 screws.
Step 2 Detach 2P Wire at the connector (CN2006) on Main
P.C.B.
Step 3 Detach Voltage Selector P.C.B. from Rear Panel as
arrow shown.
Step 4 Lift up SMPS Inner Chassis Unit to release the catch
between the SMPS Inner Chassis Unit & the Rear Panel.
Step 5 Release 2 tabs.
Step 6 Remove Rear Panel.
56