Step 4 Remove 3 screws at rear panel.
Step 5 Remove Main P.C.B. according to the arrow shown.
9.25. Disassembly of SMPS P.C.B.
• Follow the (Step 1) to (Step 5) of Item 9.3
• Follow the (Step 1) to (Step 7) of Item 9.4
• Follow the (Step 1) to (Step 5) of Item 9.19
Step 1 Detach 11P cable at the connector (CN5802) on SMPS
P.C.B..
Step 2 Remove 4 screws on SMPS P.C.B..
Step 3 Lift up the SMPS P.C.B. as arrow shown.
79