9.18.1. Assembly of Audio Digital Amp IC
(IC5300)
Step 1 Fix the Audio Digital Amp IC (IC5300) on to D-Amp
P.C.B..
Step 2 Screw back TR Spring to hold the Audio Digital Amp IC
(IC5300) onto the Heatsink Power Unit.
Step 3 Solder the pins of Audio Digital Amp IC.
Step 4 Use a blower to remove the minute particles after the
screwing of TR Spring.
Caution: Ensure pins of the Audio Digital Amp IC (IC5300)
are properly seated and soldered on D-Amp P.C.B..
9.19. Disassembly of SMPS P.C.B.
• Refer to "Disassembly of Top Cabinet.".
• Refer to "Disassembly of Front Panel Unit".
• Refer to "Disassembly of D-Amp P.C.B.".
Step 1 Remove 1 screw.
Step 2 Remove 3 screws.
Step 3 Detach 2P Wire at the connector (CN2005) at Main
P.C.B..
51