Table of Contents
Advertisement
CS-1732
/ CS-1734
User Manual
A
A
Hotkey Setting Mode
Hotkey Setting Mode is used to set up your CS-1732
/ CS-1734
switch configuration.
A
A
All operations begin with invoking Hotkey Setting Mode (HSM).
Invoking HSM
To invoke HSM do the following:
1. Press and hold down the Num Lock key
2. Press and release the minus key
3. Release the Num Lock key
Note: 1. There is an alternate key combination to invoke HSM. See below for details.
2. The minus key must be released within one half second, otherwise Hotkey
invocation is canceled.
When HSM is active, the Caps Lock, and Scroll Lock LEDs flash in succession to
indicate that HSM is in effect. They stop flashing and revert to normal status when you
exit HSM.
Ordinary keyboard and mouse functions are suspended - only Hotkey compliant
keystrokes and mouse clicks (described in the sections that follow), can be input.
At the conclusion of some hotkey operations, you automatically exit hotkey mode. With
some operations, you must exit manually. To exit HSM manually, press the Esc key, or
the Spacebar.
Alternate HSM Invocation Keys
An alternate set of HSM invocation keys is provided in case the default set conflicts
with programs running on the computers.
To switch to the alternate HSM invocation set, do the following:
1. Invoke HSM (see above)
2. Press and release the H key
The HSM invocation keys become the Ctrl key (instead of Num Lock) and the F12 key
(instead of minus).
Note: This procedure is a toggle between the two methods. To revert back to the original
HSM invocation keys, invoke HSM, then press and release the H key again.
16
2005-12-21
Advertisement
Table of Contents
