List Hotkey Settings; Usb Reset; Hotkey Beeper Control; Disable Port Switching Keys - ATEN MasterView CS-1732A User Manual

CS-1732 / CS-1734 User Manual
A A

List Hotkey Settings

To see a listing of the current hotkey settings, do the following:
1. Invoke HSM (see p. 16).
2. Press and release the F4 function key.
3. Open a text editor or word processor and use its Paste function to display the
settings.

USB Reset

If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see p. 16).
2. Press and release the F5 function key.

Hotkey Beeper Control

The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the following:
1. Invoke HSM (see p. 16).
2. Press and release the B key.
The Beeper toggles On or Off. The Command Line displays Beeper On or Beeper Off
for one second; then the message disappears and you automatically exit Hotkey Mode.

Disable Port Switching Keys

To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]), do the
following:
1. Invoke HSM (see p. 16).
2. Press [X] [Enter].
Note: This procedure is a toggle. To enable the Port Switching keys repeat steps 1 and 2.
18
2005-12-21