Attaching And Positioning The Microphones - Sennheiser SK 500 G3 Instruction Manual

Putting the bodypack transmitter into operation
Connect the 3.5 mm jack plug
microphone or instrument cable to the
³
socket (3.5 mm jack socket).
Lock the 3.5 mm jack plug by screwing down the
coupling ring
Via the operating menu, adjust the sensitivity of the
microphone/line input (see page 21).

Attaching and positioning the microphones

ME 2
Use the microphone clip
clothing (e.g. tie, lapel).
Attach the ME 2 microphone as close as possible to the
sound source.
The ME 2 clip-on microphone has an omni-directional
pick-up pattern. It is therefore not necessary to position it
precisely.
ME 3
Adjust the ME 3 headmic so that a comfortable and
secure fit is ensured.
The ME 3 headmic has a cardioid pick-up pattern.
Position the microphone so that its sound inlet is
directed towards the sound source (e.g. mouth).
³
.
to attach the microphone to
from the Sennheiser
MIC/LINE
9