Cleaning, Care And Maintenance; Service - AEG LM 1.5 Instructions For Use Manual

40
Error/Problem
Long charging
time
Battery voltage
too low
CLeaNiNg, Care aNd MaiNte-
NaNCe
▪
Clean clamps after every charging. to prevent corrosion, wipe off any battery
fluid which may have come into contact with the clamps.
▪
Carefully wind the cable when storing the device. this will help prevent acciden-
tal damage to the cable and the device.
▪
Clean the product with a soft, dry cloth.
▪
store the machine in a clean, dry place.

Service

should you have any questions regarding commissioning or operating in spite
of studying these operating instructions, or if a problem should occur against all
expectations, please get in contact with your specialist supplier.
Possible cause
only a very low charging current
is used in very low temperatures
(below 0 ºC). this will extend
the charging time. as the battery
warms up, the charging current is
adjusted accordingly.
Battery capacity too high for the
charger being used.
Battery wasn't charged long
enough.
Correction
Charge battery in
normal conditions.
explosion hazard!
Never charge frozen
batteries.
Use a suitable
charger.
ensure the battery
is charged long
enough.