AEG Voxtel Smart 3 Quick Start Manual page 5

• Install the back cover by aligning the back cover tabs with the notches
located at the top of the back panel.
• Push down the back cover until it clicks into place.
4.5 Insert and mount memory card (see P5)
• You can insert a memory card by pushing the card firmly into the slot
with the metal contacts facing up and in the direction as indicated.
>The phone will prepare the SD card for mounting and perform media
scanning.
• If the SD card fails to mount on the phone, press
Storage > SD Card Settings > Mount SD card.
4.6 Unmount and Remove memory card (see P6)
If the phone is powered off:
• Push the card gently inwards to eject the memory card.
If the phone is powered on:
• Press and tap Settings > Storage > SD Card Settings > Unmount
SD card.
• Remove the SD card by pushing the card gently inwards to eject it.
4.7 Charge your phone (see P6)
• Place the handset on the DECT base station to charge for at least 6
hours.
• If the red charging LED did not light up, you need to re-align the phone
to get a good charging contact with the base station.
• Once charged,
charged.
4.8 Switching on your phone
• Press and hold
screen starts to display the Android logo.
>It takes about 1 minute for the phone to power up completely.
4.9 Switching off your phone
• Press and hold
Phone Options menu.
• Tap to select Power off.
will appear to indicate that the handset is fully
| on the side panel of the handset until the LCD
|
on the side panel of the handset to activate the
and tap Settings >
5