Electric Handlebar Switch - RIEJU MRT 50 Owner's Manual

2 3
HANDLE BAR SWITCHES
(Left hand side.)
1-. Indicator Switch
This has 3 positions: in the centre position it
is deactivated, to indicate right it must be
moved to the right and to indicate left it must
be moved to the left. Note that the button
always returns to the central position, to
switch off the direction indicators push but-
ton.
2-. HORN BUTTON (Red)
Press the button to activate the horn.
4 1
3-. MAIN AND DIP BEAM LIGHT SWITCH
This switch has two positions: when it's down the dip beam is on and in the upper position the main beam
is illuminated. The lights run directly from the engine, to switch the lights on the Ignition key has to be tur-
ned towards the lighting position, on all MRX models.
4-. COLD START (CHOKE)
When the motor is cold, the choke lever should be placed in the On position.
CAUTION: Once the motor has reached it's normal working temperature, return the choke
lever go back to it's original position, otherwise it could cause the motor to misfire.
9