Advertisement
Quick Links
T E C H N O L O G I E S
User Guide
1:5 mSATA / micro SATA
SSD Duplicator
(
)
MSDU5
www.addonics.com
Technical Support
If you need any assistance to get your unit functioning properly, please
have your product information ready and contact Addonics Technical
Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
Advertisement
Related Manuals for Addonics Technologies MSDU5
Summary of Contents for Addonics Technologies MSDU5
- Page 1 T E C H N O L O G I E S User Guide 1:5 mSATA / micro SATA SSD Duplicator MSDU5 www.addonics.com Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical...
- Page 2 Unpacking and Overview 1. LCD Mangement Console 2. Source Slot 3. Target Slots Duplicator Panel The Duplicator Panel There are four buttons and an LCD mSATA SSD Micro SATA HDD on the panel of HDD Duplicator. in the adapter 4. LCD shows a function or a message.
- Page 3 Quick Start By default, the duplicator will initialize, scan for drives and offer the copy function. Insert the source and target drives, power up the unit, wait for the copy function to appear, then press ENT. Canceling Functions When selection menu options, canceling is done by pressing ESC. When the unit is busy performing an operation such as copy, verify, or overwrite, the operation can be canceled by holding the ESC button until the unit beeps.
- Page 4 NOTE: Target drive size is still required to be equal to or greater than source. Only works with source drives formatted using Master Boot Record. If the source drive has a boot record other than MBR, the entire disk will be copied as if Fast Copy were OFF. If the source drive is formatted with a Master Boot Record and contains only FAT32 or NTFS partitions, identical partitions will be created on the target(s) and only the files will be copied.
- Page 5 NOTE: This function scans the entire disk before proceeding. Providing a drive that is as small as possible is strongly recommended. 11-03. Compare Firmware Used to confirm correct firmware. Connect a drive formatted as FAT containing one partition with the firmware file in the root directory. NOTE: This function scans the entire disk before proceeding.
- Page 6 CONTACT US www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/...