Dirt Devil M085700CAB Owner's Manual page 7

Grip cardboard collar and push onto Attach front panel (Diagram 2).
dirt tube (Diagram 1). NOTE: NOTE: Makesure the tab on the bot-
(Diagram
la)
Make sure the top of tom of the front panel goes into the
the bag is tucked into the bag cham- slot located on the front of cleaner
ber (a) and the bottom of the bag is (Diagram 2a).
tucked under (b).
HOSE ASSEMBLY TOOL STORAGE
he hose (hose wand)
into the tool caddy on
the left side. Insert
the short end of the
hose onto the tool
CAUTION: Brush agitator continues to rotate while hose is removed or in use and at all times while
cleaner is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while
cleaner is on.
Cleaner must be in the upright position to lift the rotation brush off the carpet when cleaning above the floor.
CORD RELEASE
HEIGHT ADJUST
Release for easy cord,
be in the upright or
removal. Store cord operating position to
in cord guide (see adjust carpet setting.
Features - pg. 5) to ADJUSTING IN THE
keep cord out of the UPRIGHT POSITION:
Rotate knob to the
desired setting. NOTE:
The knob will rotate
easily. Once the carpet
setting is selected, and the cleaner placed in the
operatlng position, the setting will be in the correct
position. ADJUSTING IN THE OPERATING POSI-
TION: Rotate knob to the desired setting. NOTE: The
knob will rotate with some resistance. The nozzle will
raise and lower as the knob is rotated.