WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS
-
UNPLUG CLEANER BEFORE
CHANGING BELT OR BRUSHROLL.
I
I
Lay cleaner flat and flip
cleaner to expose nozzle
base. Base should lay flat
and face up. To remove noz-
zle guard, use Phillips or Flat
Head screwdriver to remove
the five (5) screws. Arrows
show location of screws.
I
BELT STYLE 4 OR 5
1
I
I
I
Lift nozzle guard off.
Be sure belt is off motor
shaft. Lift and remove
brushroll. Dispose of old belt.
Slide belt onto motorshaft.
Place new belt in area of
brushroll without bristles.
With new belt in place, pull
Reattach nozzle guard.
Secure by aligning the three
and slide brushroll into nozzle
(3) tabs in the base slots.
making sure that the brushroll
Replace all five (5) screws
end caps are in the correct
to secure nozzle guard.
orientation (6a inset). Rotate
brushroll manually to make
sure belt is properly aligned.