Warning Lamps - CITROEN Berlingo Owner's Handbook Manual

Hide thumbs Also See for Berlingo:
Table of Contents

Advertisement

Warning lamps

Each time the vehicle is started: a series of warning lamps comes on applying a self-test check. They go off almost
immediately. When the engine is running: the warning lamp becomes a warning if it remains on continuously or fl ashes.
This initial warning may be accompanied by an audible signal and a message which appears in the screen.
Do not ignore these warnings.
Warning lamp
STOP
Parking
brake/Brake
fl uid level/
EBFD
Engine oil
pressure and
temperature
Downloaded from
www.Manualslib.com
is
indicates
major faults linked with
on, associated
the "Brake fl uid level",
with another
"Engine oil pressure and
warning
temperature", "Coolant
lamp and
temperature", "Electronic
accompanied
brake force distribution",
by a message
"Power steering" and
in the screen.
"Under-infl ation detection"
warning lamps.
that the parking brake is applied
on.
or has not been released fully.
on.
low brake fl uid level.
remaining on even
though the level
a fault with the electronic
is correct and
brake force distribution.
associated with the
ABS warning lamp.
on while
low pressure or a high
driving.
temperature.
remaining on,
even though the
a major fault.
level is correct.
manuals search engine
Instruments and controls
Solution - action
You must stop as soon as it is safe to do
so, park and switch off the ignition. Have it
checked by a CITROËN dealer or a qualifi ed
workshop.
Releasing the parking brake switches off the
warning lamp.
Top up using a fl uid recommended by CITROËN.
You must stop as soon as it is safe to do
so, park and switch off the ignition. Have it
checked by a CITROËN dealer or a qualifi ed
workshop.
Park and switch off the ignition then allow to
cool. Visually check the level. Chapter 6, "Levels"
section.
Have it checked by a CITROËN dealer or a
qualifi ed workshop.
2 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents