CITROEN Berlingo Owner's Handbook Manual page 204

QUESTION
TA is selected. However,
certain traffi c jams
along the route are not
indicated in real time.
I receive a speed camera
alert for a camera which
is not on my route.
The audible speed
camera alert is not
working.
The altitude is not
displayed.
The route is not
calculated successfully.
9.34
Downloaded from www.Manualslib.com
On starting, it is several minutes before the system begins to receive the
traffi c information.
In certain countries, only major routes (motorways...) are listed for the
traffi c information.
The system announces all speed cameras located in a conical zone
forward of the vehicle. It may detect speed cameras on nearby or parallel
roads.
Audible alerts are not active.
The alert volume level is set to minimum.
On starting, the initialisation of the GPS may take up to 3 minutes
to receive more than 3 satellites correctly.
Depending on the geographical environment (tunnel...) or the weather,
the conditions of reception of the GPS signal may vary.
The exclusion criteria may confl ict with the current location (exclusion of
toll roads on a motorway with tolls).
manuals search engine
ANSWER SOLUTION
Wait until the traffi c information is being received
correctly (displaying of the traffi c information
symbols on the map).
This phenomenon is normal. The system is
dependent on the traffi c information available.
Zoom the map to view the exact position of the
speed camera.
Activate audible alerts in Navigation Menu,
Settings, Set parameters for risk areas.
Increase the speed camera alert volume.
Wait until the system has started up completely.
Check that there is a GPS coverage of at least
3 satellites (long press on the SETUP button, then
select GPS coverage).
This phenomenon is normal. The system is
dependent on the conditions of reception of the
GPS signal.
Check the exclusion criteria.